7823
TAUS0612737EN00
Solution ID
6
Solution Usage
Description
System Configurator, 7823.
Solution
7823 System configurator.
TAUS0616538EN00
Solution ID
6
Solution Usage
Description
Code C3F80.
Solution
CAUSE: A failed print head (laser write unit).
SOLUTION: Replace the print head (11UM-9540).
Note: The print head comes with the print head control board (PWB-JD) and the mirror assembly which is mounted below the print head. All three must be
replaced as a set.
TAUS0607904EN00
Solution ID
5
Solution Usage
Description
C3F90 error message.
Solution
CAUSE: Transfer Unit handle (M4) is not locked into position when making a copy or printing. This may happen while a technician is servicing the 7823 with
the door interlocks cheated.
SOLUTION: To reset the CSF90 error message, perform the following:
1. Move the Transfer Unit handle (M4) to the right to lock it into place.
2. Remove the cover over the Tech. Rep Setting Switches Board.
3. Press switch S24 to reset the message.
4. Replace the plastic cover over the Tech. Rep Setting Switches Board.
TAUS0607910EN00
Solution ID
5
Solution Usage
Description
Macintosh* support.
Solution
The 7823 supports Macintosh Operating Systems v7.5x, 7.6x & 8. The 7823 will work with a Macintosh in a networked environment. Macintosh drivers are
available on the Fiery* Controller's Software & Utilities CD-ROM that comes with the printer.
Note: 7823 cannot be directly connected to a Macintosh. The 7823 must be networked to be used by a Macintosh. An option is to create a small ethernet
network by putting an ethernet card in the Macintosh. The Macintosh and the 7823 can then be connected using an ethernet hub.
* Trademark ownership information
TAUS0608145EN00
Solution ID
5
Solution Usage
Description
Cannot perform calibration adjustments or use as a scanner when printing through the parallel port on the 7823.
Solution
CAUSE: Printing using only the parallel port does not allow access to the calibration or scanning capabilities of the machine. The machine is designed to
print primarily via a network connection to the Fiery* controller.
SOLUTION: Print using a network connection to the Fiery controller to access all the capabilities of the machine.
* Trademark ownership information
8
Copyright 2006, Konica Minolta Business Solutions U.S.A., Inc.
October 2006
(152 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales