Electronics For Imaging Pi6500 Pro Manual de usuario descargar pdf (Pagina 34)

7823

4. Press [Fuser Oil Change].

5. Press [User Set] to change to user mode.

6. Press [Ex.] repeatedly to exit the service mode.

7. The user can now manage fuser oil replenishment.

TAUS0613406EN00

Solution ID

Solution Usage

Description

How to turn on the PM counter for the 7823.

Solution

There is no PM counter for this unit therefore no PM warning indication. There is, however, a service indicator on the LCD. When the oil can in the lower left

hand corner is displayed, the customer can press it and it will display a P code which will indicate the type of service needed. Counters will need to be

checked as to which area will need to be serviced.

TAUS0613455EN00

Solution ID

Solution Usage

Description

ED724, no display on the editor board.

Solution

CAUSE: There is no 24V supply to the editor board.

SOLUTION: Check for 24V at CN4-1 (red wire) on the image edit board. If not present, check for 24V at CN3-3 on PWB-L. If not present, replace PWB-L

(p/n 11UM-9170).

TAUS0613918EN00

Solution ID

Solution Usage

Description

Light lines in the lead-to-trail direction.

Solution

CAUSE: Contaminated or failed oil collecting blade.

SOLUTION: The oil collecting blade (p/n 11UM54360) should be cleaned every 5,000 copies and replaced every 120,000 copies.

TAUS0613984EN00

Solution ID

Solution Usage

Description

C0210 is displayed when printing multiple sets of more then 1 original. When clearing the jam, 2 copies are adhered to the image transfer film.

Solution

CAUSE: The image transfer film is degraded and needs to be replaced.

SOLUTION: Replace the image transfer film (p/n 11UM20020).

TAUS0613993EN00

Solution ID

Solution Usage

Description

Image on 8.5x11 paper is not centered. Large front and rear deletion are also occurring.

Solution

CAUSE: Paper tray sizes were not set correctly.

SOLUTION: To adjust paper cassette size, perform the following:

1. Press the [Utility] key then press Meter Count.

2. Press [Stop], [0], [0], [Stop], [0], [1] to enter service mode.

3. Press Settings.

4. Press Paper Size.

October 2006

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 54 55

Comentarios a estos manuales

Sin comentarios

Electronics For Imaging Pi6500 Pro Manual de usuario Pagina 34

Comentarios a estos manuales

Relacionado con productos y manuales para Los servidores de impresión Electronics For Imaging Pi6500 Pro