Electronics For Imaging Pi6500 Pro Manual de usuario Pagina 24

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 55
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 23
7823
THE LOWER DRAWER IS NOT AVAILABLE message.
Solution
CAUSE: The segment gear (paper lift gear) on the paper tray is broken and the tray can not lift the paper.
SOLUTION: Replace the segment gear (p/n 25TU43080).
TAUS0618639EN00
Solution ID
2
Solution Usage
Description
C0042 at power up.
Solution
CAUSE: A failed relay 1. Relay 1 failure can be caused by fuser oil contamination. Moving the machine without draining the fuser oil can cause the oil to
spill down the back of the machine resulting in paper tray sensor failure and relay 1 failure.
SOLUTION: Replace relay 1 (p/n 11UM88090).
TAUS0622610EN00
Solution ID
2
Solution Usage
Description
C3F80 at power up.
Solution
CAUSE: A failed main power relay (RY1). Burnt contacts on the relay cause a loss of 24V DC.
SOLUTION: Replace RY1 (p/n 11UM88090).
TAUS0627103EN00
Solution ID
2
Solution Usage
Description
System requirements to run Fiery* Command WorkStation*.
Solution
The system requirements for Command Workstation (CWS) are as follows:
IBM* PC compatible
MS Windows NT 4.0* service pack 3
850MB or larger hard drive
17" Monitor
Keyboard and mouse
32MB RAM
200MHz Pentium* Processor
1024x768 video resolution
Small fonts selected in screen setup
65K+ colors, necessary to see PostScript* errors
* Trademark ownership information
TAUS0601006EN00
Solution ID
1
Solution Usage
Description
Fiery* ZX, after entering setup the controller is locked up at PLEASE WAIT.
Solution
CAUSE: The video interface board has been dislodge during shipping.
SOLUTION: Remove and reseat the video interface board on the motherboard, then perform setup.
* Trademark ownership information
24
Copyright 2006, Konica Minolta Business Solutions U.S.A., Inc.
October 2006
Vista de pagina 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 54 55

Comentarios a estos manuales

Sin comentarios