Electronics For Imaging Pi6500 Pro Manual de usuario descargar pdf (Pagina 12)

7823

Solution

To clear The Toner Collection Bottle full message, perform the following:

1. Access the SERVICE MODE MENU:

a. Press UTILITY.

b. Press METER COUNT on display.

c. Press STOP, 0 twice, STOP, 0, and 1.

d. The Service Mode Menu will now be displayed.

e. Press Counter List.

f. Press Life Counter.

g. Press Life 3 (others).

h. Locate Toner Collect 100% (at bottom right of LCD display)

i. Press "C" (clear) to the right of the quantity key "0".

2. To return to the main copy screen, press "EX " (Exit) four times (located bottom right of LCD).

TAUS0610365EN00

Solution ID

Solution Usage

Description

The Image Centering function is not working.

Solution

CAUSE: Non-standard size originals are being used.

SOLUTION: In order for this function to operate, only standard-sized originals must be used. The originals must be placed normally on the glass with the

upper left corner in the sample area as designated on the scale plate.

TAUS0612746EN00

Solution ID

Solution Usage

Description

LPT Time Out Error is displayed on the PC when attempting to print to a Fiery* controller through the parallel port.

Solution

CAUSE: The computer parallel port is not set to the ECP mode.

SOLUTION: Set the parallel port to ECP mode in the computer's BIOS set up.

* Trademark ownership information

TAUS0614042EN00

Solution ID

Solution Usage

Description

Dark streaks in the lead-to-trail direction.

Solution

CAUSE: A dirty or failed PC drum charge corona wire.

SOLUTION: Clean/replace the PC drum charge corona wire (p/n 11UM25090). The scheduled replacement interval is 15,000 copies.

TAUS0617961EN00

Solution ID

Solution Usage

Description

How to reset a malfunction code.

Solution

To reset a malfunction code, perform the following:

1. Remove the cover over the Tech. Rep Setting Switches Board.

2. If the wrench symbol is present on the display, touch it to display the failure message.

3. Press switch S24 to reset the message.

4. Replace the plastic cover over the Tech. Rep. Setting Switches Board.

October 2006

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 54 55

Comentarios a estos manuales

Sin comentarios

Electronics For Imaging Pi6500 Pro Manual de usuario Pagina 12

Comentarios a estos manuales

Relacionado con productos y manuales para Los servidores de impresión Electronics For Imaging Pi6500 Pro