Di200
Part number for the fiber optics cable from the CCD to the MFB2.
Solution
Fiber optics cable (p/n 4015-1062-01).
TAUS0634777EN00
Solution ID
0
Solution Usage
Description
"Please Add Toner" is displayed even though the toner bottle is full. The ATDC circuits have been checked and the main and sub hopper motors are good.
Solution
CAUSE: Inside the sub hopper, the magnet (P/N 9326-2900-06) may be catching on the inside of the hopper, preventing proper actuation of the Sub Hopper
Toner Empty switch.
SOLUTION: Make sure that the actuator can move freely up and down when no toner is in the sub hopper.
TAUS0635572EN00
Solution ID
0
Solution Usage
Description
Item numbers for Parts or Service Manuals.
Solution
Please refer to this publications list .
Note:
To view the above PDF, Acrobat* Reader must be installed. Acrobat Reader can be downloaded for free from the Adobe* web site at:
[[http://www.adobe.com/products/acrobat/readstep2.html| URL http://www.adobe.com/products/acrobat/readstep2.html]]
* Trademark ownership information
TAUS0636122EN00
Solution ID
0
Solution Usage
Description
The AF-9 indicates an original document jam intermittently. Sometimes the document will exit and sometimes it is partially exited. Resetting the jam
sometimes requires repeated opening and closing of the feeder.
Solution
CAUSE: There is tape used to hold the wiring harness in the feeder section. The end of the tape can come loose over time, brushing against the original size
detection sensor causing it to deactivate sluggishly or not at all.
SOLUTION: Remove the loose end of the tape from the sensor area and re-tape the harness to protect it from wear.
TAUS0636925EN00
Solution ID
0
Solution Usage
Description
Can a coin-op box and copy track be used together?
Solution
No, a coin box and copy track are not compatible with each other. The use of a coin op device will interfere with copytrack. Only one system of security can
be used at a time.
TAUS0637123EN00
Solution ID
0
Solution Usage
Description
Is a controller needed when printing locally or using an external print server?
Solution
When printing locally (parallel) or using an external print server, a controller is necessary for the machine to print. Please refer to the price list for the correct
controller. The machine will not print by just connecting the parallel cable or print server to the Centronics port on the machine.
8
Copyright 2006, Konica Minolta Business Solutions U.S.A., Inc.
October 2006
(55 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales